Fine Mesh maintenance of a safety net to prevent the net is dragged over rough surfaces or sharp edges. Second, people who rely on or prohibited goods piled pressure to the safety net. Third, avoid people jump into or within the article cast the net. Fourth, to avoid falling into a lot of welding or other security fence Mars. The main purpose for a variety of construction sites, especially in high-rise buildings can be completely closed construction. Can effectively prevent physical, objects falling damage and prevent fires caused by welding sparks, dust and reduce noise pollution, to civilization construction, dense mesh safety nets to protect the environment and beautify the effect of the city. Safety net Manufacturers teach you a little knowledge of some products, the safety net should be firmly permanent label, including: product name, product marking, trademark, manufacturer name and address, lot number, date of production, industrial production permit number and identification card firmly attach safety and inspection certificates. Every 5 to 10 network should be accompanied by instructions for use. 2, the side ropes must be firmly linked with the net body, building dense mesh safety net, while rope diameter of at least twice the diameter of the rope net, but not less than 7mm. 3, must be strictly in accordance with the purpose of use, select the type of network, according to the load height, width select network, established network is not a substitute flat screen. 4, purchase new network must have a product quality inspection certificate. 5, the need for network and support (frame) to be checked before installation, make sure no mistakes only after the installation, check the network of signs with their chosen network consistent appearance without any defects affect the use. 6, support (frame) have sufficient strength, rigidity and stability, and the Department of network support at no sharp corners and edges. 7, installation, building dense mesh safety net, in each tying, side ropes should support (frame) abutted and connected with a separate tether tying points evenly distributed along the network edge, it must be located no more than 75cm, tying the knot should be consistent with convenient connections are secure and easy to undo, in principle not disperse after removal of the force. 8, tendons network installation, must be reinforced rope connecting the support (frame) on. 9, after the network is installed, it must use only after passing the examination of professional executives. 10, to avoid a large number of welding or other internal networks Mars falls, people jump or throw the items into the net. 11, net after removal, must be stored in a dry, fireproof coffers, according to specifications, network like classified storage, comprehensive inspection by the person responsible for the custody. 12, pay attention to the product lifetime. Expired or used again after the test must be certified before use. 13, head of the safety net for A-level risk of falling in place; grade B is suitable for fall risk or with no safety net legislation (the barrier) complete fall protection. Dense mesh safety net factory, Gian rope (certification), head of the safety net provided by the Shandong Huimin Ltd. Ji'an rope. Shandong Huimin Ji rope course Ltd. (www.hmjasw.com) Shandong, security, protective products processing leaders, over the years, the company is implementing the scientific management, innovation and development, the principle of honesty and trustworthiness, and satisfy customer needs. Gian rope in leadership with the staff warmly welcome all inquiries negotiations to create a better future Gian rope.